|
DESCRIPTION - A flammable rubber resin solution adhesive
which withstands normal carpet cleaning techniques and is easily
applied through an adjustable spray nozzle.
USES - For bonding a wide range of materials but particularly
suitable for spot sticking carpet tiles (except PVC backed types)
and for perimeter fixing of rubber foam backed carpets. It is
suitable for use on most common subfloors but not suitable on
fully flexible vinyl floorcoverings.
STANDARDS - When used to install carpets or carpet tiles, all
aspects of the installation should be in accordance with the
requirements of BS5325 (Installation of Textile Floorcoverings)
and supplementary specifications.
PREPARATION - Surfaces must be sound, smooth, dry and free
from grease, dust, paint, polish or any contaminants which may
prevent adhesion.
Asphalt and STOPGAP waterproof surface membranes must be
skimmed with at least 3mm of the appropriate smoothing
underlayment.
For best results the surfaces should be between 10°C and 20°C.
DAMP BASES - Treat damp subfloors with STOPGAP waterproof
surface membranes.
SMOOTHING - Use STYCCOSCREED or STOPGAP smoothing
underlayments.
CLEANING - Use STYCCOCLEAN C140 Floor Cleaner for
removing grease, oil, polish, soap, etc.
APPLICATION - Select the spray pattern required by turning the
adjustable aerosol nozzle. Holding the can 120mm-175mm away
from the surface, apply an even coat of adhesive to both
surfaces. Allow the adhesive to become tacky (1-3 minutes) then
press the two surfaces together firmly.
N.B. Very absorbent surfaces may require two coats of adhesive.
After use - Invert can, press plunger to expel small amount of
propellant to clear nozzle of adhesive.
F12
P R O D U C T D A T A S H E E T
P U B L I S H E D N O V E M B E R 1 9 9 9
CI/SfB 1976 reference by SfB Agency
(43) Yt3
MULTI-PURPOSE AEROSOL
TECHNICAL CHARACTERISTICS
COLOUR - Pale Straw.
CONSISTENCY - Not applicable.
SPECIFIC GRAVITY - Not applicable.
FLASH POINT - Not applicable.
COVERAGE - 3m 2 per can, coating both
surfaces.
DRYING TIME - 1-3 minutes, depending on the
condition and absorbency of the
surface and amount applied.
STORAGE - Store between 5°C and 30°C.
SHELF LIFE - 12 months stored under good
conditions.
PACKAGES - 500ml aerosol can.
HEALTH AND SAFETY ADVICE • Obtain the relevant Material
Safety Data Sheets and follow the advice given.
CAUTION - Pressurised container. Protect from sunlight and do
not expose to temperatures exceeding 50°C. Do not pierce or
burn, even after use. Do not spray on a naked flame or any
incandescent material. Prohibit smoking or use of any means of
ignition which may initiate ignition of the product spray in the
work area.
DO NOT BREATHE VAPOUR OR SPRAY - Inhalation may cause
discomfort or distress. Ensure provision of constant fresh air
ventilation during and immediately after use in the work area.
IN EVENT OF SKIN CONTACT - Wash immediately with soap
and water. In case of contact with eyes, mouth or nose, wash
with water and obtain medical attention.
When accidental or excessive spray is dispensed, absorb onto a
tissue and allow to dry prior to tissue disposal. |